BlueCast Original LCD/DLP

LAB 3D Original
copy-of-bluecast-original-5
copy-of-bluecast-original-4
copy-of-bluecast-original-3
copy-of-bluecast-original-2
copy-of-bluecast-original

BlueCast Original LCD/DLP

CHF142.70 inc.Vat

COD: N/A Categoria: Tag: , ,
Svuota

Descrizione

Resina per colata con elevata precisione dimensionale e qualità della superficie

  • Resina calcinabile
  • Quasi nessun residuo di cenere
  • Facilmente rielaborabile

BlueCast LCD / DLP

Castable: YES – Castability: Excellent

Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Phrozen Shuffle, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember, B9 (black resin profile) etc.

Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air

UV cure: 30 – 60 min. When completed, the print come white

Shrinkage: Low

Tank bottom: FEP

Color: Green

Size: 500 gr

Informazioni aggiuntive

Bottle Weight

500 gr

Recensioni

Ancora non ci sono recensioni.


Recensisci per primo “BlueCast Original LCD/DLP”

BLUECAST LCD/DLP  Original / LS23

Tuned for LCD/DLP machines are also compatible with almost of DLP 3d printers (405 nm).Wery low shrinkage and High AccuracySuitable for filigree, micrò pave, stones settings, silver design and standard jewelry.Minimal residue after burnout process (0.003%)Low-exhaust emission during the burnout processVirtually no expansion of resin during burnout processCompatible with all investments (Tested with Kerr® Satincast, R&R PlastiCast, Optima Prestige, Omega Plus)Excellent castabilityWashable with 90%/99% denatured alcohol (IPA) or ethyl alcohol 90%/99%.Very low deformation during post-printingDirect casting of models with no need for lacquer or Teflon® (PTFE) sprayHigh definition and smoothness surfacesRemarkable definition of micro-engravings and micro-reliefsDOWNLOAD :

Ti potrebbe interessare…

Hai appena aggiunto questo prodotto al carrello: