- Additional information
- Reviews (0)
- PRODUCT FEATURES
lueCast LCD / DLP
Castable: YES – Castability: Excellent
Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Phrozen Shuffle, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember, B9 (black resin profile) etc.
Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air
UV cure: 30 – 60 min. When completed, the print come white
Tank bottom: FEP
Size: 500 gr
BLUECAST LCD/DLP Original / LS23
Tuned for LCD/DLP machines are also compatible with almost of DLP 3d printers (405 nm).
Wery low shrinkage and High Accuracy
Suitable for filigree, micrò pave, stones settings, silver design and standard jewelry.
Minimal residue after burnout process (0.003%)
Low-exhaust emission during the burnout process
Virtually no expansion of resin during burnout process
Compatible with all investments (Tested with Kerr® Satincast, R&R PlastiCast, Optima Prestige, Omega Plus)
Washable with 90%/99% denatured alcohol (IPA) or ethyl alcohol 90%/99%.
Very low deformation during post-printing
Direct casting of models with no need for lacquer or Teflon® (PTFE) spray
High definition and smoothness surfaces
Remarkable definition of micro-engravings and micro-reliefs